|
Post by admdonuts on Nov 8, 2019 19:04:46 GMT -6
Guys,
I can't get the Ship Design screen to open up all the way so, that I can access the other Aircraft/Missile TABs to convert CL/CA to CVLs. Toggling the 'Wide Mode' button only gives you the two (2) screens I attached below.
I've tried using the mouse, moving the arrow all around the edge of the screen to see if it can be 'pulled wider', but No such luck.
Has anyone else experienced this problem? Any HELP/SUGGESTIONS you could provide would be sincerely appreciated.
Narrow Wide Mode
|
|
|
Post by gonzogames on Nov 8, 2019 21:20:22 GMT -6
I had the same issue and finally figured it out with help from the guys at TortugaPower's discord. You need to change your display text size to 100%. I also had mine at 125%.
|
|
|
Post by admdonuts on Nov 9, 2019 4:53:35 GMT -6
gonzogames,
THANK YOU!
That worked now. However and unfortunately for me, I have to put on my glasses to play the game now. :^(
Note & apology to other RTW2 members who have suggested this to me before: "I didn't realize that you had to Reboot your computer in order for the 100% Text size to be implemented. So, when I originally tried it, it didn't work."
Regards,
James
|
|
|
Post by dorn on Nov 9, 2019 5:17:18 GMT -6
gonzogames, THANK YOU! That worked now. However and unfortunately for me, I have to put on my glasses to play the game now. :^( Note & apology to other RTW2 members who have suggested this to me before: "I didn't realize that you had to Reboot your computer in order for the 100% Text size to be implemented. So, when I originally tried it, it didn't work." Regards, James Changing your desktop resolution could help you.
|
|
|
Post by dizzy on Nov 9, 2019 5:50:41 GMT -6
You don’t need 100% text size. I’m not sure how far I zoomed in, but some zoom will work. Try that. I think I used a custom setting around 113%. Helped my eyes. Depends on your resolution setup as well.
|
|