krawa
Junior Member
Posts: 90
|
Post by krawa on Jul 3, 2019 14:58:23 GMT -6
It's 1917 and I decided it's time to build some for a new raiding/colonial CL. I went to the ship designer, ticked "clear all values" and entered the CL pictured below, but I couldn't save it as the ship designer always wanted to redesignate this ship a CA. I played a bit with the Parameters and couldn't find any design I could save as a CL!
However if starting from an already existing CL design and changing it to the above specs I can do it without any problems
Regarding Technologies, I have armoured belt and mine rails for CL but I'm still missing above water tubes and superimposed turrets. Savegame is attached for Review
|
|
|
Post by aeson on Jul 3, 2019 15:13:11 GMT -6
It's 1917 and I decided it's time to build some for a new raiding/colonial CL. I went to the ship designer, ticked "clear all values" and entered the CL pictured below, but I couldn't save it as the ship designer always wanted to redesignate this ship a CA. I played a bit with the Parameters and couldn't find any design I could save as a CL!
However if starting from an already existing CL design and changing it to the above specs I can do it without any problems
Regarding Technologies, I have armoured belt and mine rails for CL but I'm still missing above water tubes and superimposed turrets. Savegame is attached for Review
It's because the secondary caliber is set to 6". Reduce that and it should work.
|
|
|
Post by fredsanford on Jul 3, 2019 15:21:14 GMT -6
Do you have light cruiser design (NOT protected cruiser) from the Ship Design tech field?
|
|
krawa
Junior Member
Posts: 90
|
Post by krawa on Jul 3, 2019 17:43:33 GMT -6
It's 1917 and I decided it's time to build some for a new raiding/colonial CL. I went to the ship designer, ticked "clear all values" and entered the CL pictured below, but I couldn't save it as the ship designer always wanted to redesignate this ship a CA. I played a bit with the Parameters and couldn't find any design I could save as a CL!
However if starting from an already existing CL design and changing it to the above specs I can do it without any problems
Regarding Technologies, I have armoured belt and mine rails for CL but I'm still missing above water tubes and superimposed turrets. Savegame is attached for Review
It's because the secondary caliber is set to 6". Reduce that and it should work. That's the solution, I didn't pay Attention to secondary caliber. But maybe when checking the design there should be a warning when secondary caliber is the same as the main caliber, especially if there are Zero secondaries as in this case.
Thank you very much!
|
|