|
Post by tbr on Jan 29, 2020 11:19:46 GMT -6
When using "open design" or rebuilding a design with "unit machinery" originally set the flag for it is not set in the design screen (neither when greyed out when rebuilding nor when using the design as base for a new one). The condition saves to the design file when rebuiilding, despite not displaying, but not for a new design.
|
|
|
Post by trifler on Feb 2, 2020 18:59:31 GMT -6
When using "open design" or rebuilding a design with "unit machinery" originally set the flag for it is not set in the design screen (neither when greyed out when rebuilding nor when using the design as base for a new one). The condition saves to the design file when rebuiilding, despite not displaying, but not for a new design. It seems to be intermittent (at least for me) rather than never showing up, but I definitely confirm that this checkbox is very glitchy. Sometimes I can open the designer, check the Unit Machinery box, then close the designer and open the ship for rebuild again, and then it'll show up properly. EDIT: Maybe you meant that the "unit machinery" box is never checked after ships have completed construction. I can confirm this is happening in my game.
|
|
|
Post by trifler on Feb 4, 2020 3:59:29 GMT -6
Still happening as of 1.16B
|
|
|
Post by trifler on Feb 5, 2020 4:10:46 GMT -6
This is actually pretty serious since it appears that none of my ships have unit machinery once they are done being built. I would try starting a new game to see if that resolves it, but it takes a long time to get the Unit Machinery tech.
Still happening as of 1.16C
|
|
|
Post by trifler on Feb 10, 2020 1:05:19 GMT -6
As of 1.17:
- I created a new design from scratch and waited until it finished construction to be sure, but the Unit Machinery box still doesn't have a checkmark when choosing "Open design for rebuild". - It does appear to be marking the box when choosing "Open design"
|
|
|
Post by williammiller on Feb 11, 2020 11:03:18 GMT -6
Will look at this issue again, thanks.
|
|
|
Post by dorn on Mar 30, 2020 11:22:51 GMT -6
Unit machinery retains during refit and is grayed out as cannot be changed during refit.
|
|
|
Post by christian on Apr 22, 2020 6:23:53 GMT -6
the unit machinery box has been grayed out for me ive never been able to use it despite having all techs maxed Attachments:
|
|
|
Post by williammiller on Apr 22, 2020 8:11:07 GMT -6
Hum - will point Fredrik W towards this issue, thanks.
|
|
|
Post by trifler on Apr 30, 2020 6:14:43 GMT -6
As of 1.20 (earlier too), ships built with Unit Machinery have the checkbox checked if I select the ship and choose "Open Design", but it's grayed out with no check mark if I choose "Open design for rebuild"
|
|