akd
Full Member
![*](//storage.proboards.com/forum/images/stars/star_silver.png) ![*](//storage.proboards.com/forum/images/stars/star_silver.png)
Posts: 127
|
Post by akd on Aug 2, 2023 10:06:22 GMT -6
As you can see, the port secondary is selected, but does not allow set position and returns message as if I am trying to reposition the starboard secondary. Set position on the corresponding starboard secondary returns the same message. Also note that a red circle does not appear on the 7 or 8 gun when either is selected unlike the lettered guns above. IIRC, the autodesign started with 14 secondaries, but I reduced to 12 then later increased back to 14. ![](//storage.proboards.com/5448234/thumbnailer/nDmbecuCPXuVZoOzOQsf.png) save: mega.nz/file/k9p0UDTQ#RDA0Oazp02AsQE0iQOmwiyGTFrWw8oiuoPn0LFT4aV8
|
|
|
Post by williammiller on Aug 3, 2023 10:51:32 GMT -6
Thanks, will test this out.
|
|
|
Post by williammiller on Aug 7, 2023 9:53:24 GMT -6
If you choose 'auto position' after you change the number of secondaries/tertiaries you can reposition the guns as you see fit...a bit of a workaround, will see what can be done to change this.
|
|